Material Safety Data Sheet

PTI Process Chemicals · 5414 Business Pkwy. · Ringwood, Il 60072

For Emergency Assistance involving chemicals call - INFOTRAC (800) 535-5053

 


 

MSDS Number:P21688VX   MSDS Version:001 

001 03/08/06 ALUMINUM SULFATE,HYDRATED,TECHNICAL

 

SECTION 1. PRODUCT IDENTIFICATION

 

Item Name: ALUMINUM SULFATE, HYDRATED, TECHNICAL
MSDS #:  P21688VX
ISSUED BY:  000099
Date MSDS Prepared: 01JAN06                                                                   
 

SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS

 

Ingredient: ALUMINUM SULFATE (SARA III)
Percent: 100
NIOSH (RTECS) Number: BD1700000
CAS Number: 10043-01-3
OSHA PEL: 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192

 

SECTION 3. FIRST AID/ HAZARDS IDENTIFICATION

 

Signs/Symptoms of Overexp: IRRITATION OF EYES, SKIN, and INTESTINES.
Emergency/First Aid Proc: EYES: FLUSH WITH WATER FOR AT LEAST 15
MINUTES.SKIN: FLUSH VIGOROUSLY WITH WATER.INGESTION: IF VICTIM IS CONSCIOUS,
DILUTE BY DRINKING LARGE QUANTITIES OF WATER; GET PROMPT MEDICAL ATTENTION.
 
  

SECTION 4. FIRE FIGHTING MEASURES

 

Flash Point: NON-COMBUSTIBLE

 

SECTION 5. HANDLING AND STORAGE

 

Steps If Matl Released/Spill: USE PROPER PERSONAL PROTECTIVE EQUIPMENT.
SWEEP UP AND RECOVER IN A SUITABLE CONTAINER, OR DILUTE WITH WATER AND
RECOVER IT FOR DISPOSAL. CARE SHOULD BE TAKEN BECAUSE ALUMINUM SULFATE
BECOMES SLIPPERY WHEN WET.
Waste Disposal Method: CONSULT LOCAL AUTHORITIES. DISPOSAL MUST BE IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Precautions-Handling/Storing: STORE IN COOL AND DRY PLACE. BULK HANDLING
SYSTEM SHOULD BE WEATHER TIGHT AND HAVE DUST COLLECTORS INSTALLED.
Other Precautions: AVOID SKIN AND EYES CONTACT. DO NOT BREATHE DUST.
 
 

SECTION 6. EXPOSURE CONTROLS/PERSONAL PROTECTION

 

Respiratory Protection: DUST MASK/DUST RESPIR
Ventilation: MECH (GEN) OR LOCAL EXHAUST THAT PROVIDES ADEQUATE VENTILATION
Protective Gloves: RUBBER
Eye Protection: GOGGLES/FACE SHIELD
Other Protective Equipment: FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Suppl. Safety & Health Data: MSDS UNDATED
 
 

SECTION 7. PHYSICAL AND CHEMICAL PROPERTIES

 

Appearance And Odor: WHITE, PALE GREEN OR TAN POWDER, GRANULES OR LUMPS.
Solubility in Water: COMPLETE
 

SECTION 8. STABILITY AND  REACTIVITY DATA

 

Stability: YES
Cond To Avoid (Stability): WET OR DAMP STORAGE AREA
Materials To Avoid: NONE SPECIFIED
Hazardous Decomp Products: NONE
Hazardous Poly Occur: NO
Conditions To Avoid (Poly): NONE SPECIFIED



 

SECTION 9. TRANSPORTATION DATA

 

DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION


 

SECTION 10. DISPOSAL DATA

 

Disposal Data Review Date: 88291
Rec # For This Disp Entry: 02
Tot Disp Entries Per NSN: 005
Landfill Ban Item: YES
Disposal Supplemental Data: MSDS UNDATED IN CASE OF ACCIDENTAL EXPOSURE OR
DISCHARGE, CONSULT HEALTH AND SAFETY FILE FOR PRECAUTIONS.
1st EPA Haz Wst Name New: NOT REGULATED
1st EPA Haz Wst Char New: NOT REGULATED BY RCRA
1st EPA Acute Hazard New: NO

 

SECTION 11. LABEL DATA

 

Common Name: ALUMINUM SULFATE, HYDRATE
Special Hazard Precautions: IRRITATION OF EYES, SKIN, INTESTINES.


For Additional Information:
Contact: PTI Process Chemicals.
During business hours, Central Time - (815) 653-3856

NOTICE
PTI Process Chemicals, expressly disclaims all express or implied warranties of merchantability and fitness for a particular purpose, with respect to the product or information provided herein, and shall under no circumstances be liable for incidental or consequential damages.

Do not use ingredient information and/or ingredient percentages in this MSDS as a product specification. For product specification information refer to a Product Specification Sheet and/or a Certificate of Analysis. These can be obtained from PTI Process Chemicals

All information appearing herein is based upon data obtained from the manufacturer and/or recognized technical sources. While the information is believed to be accurate, PTI makes no representations as to its accuracy or sufficiency.  Conditions of use are beyond PTI’s control and therefore users are responsible to verify this data under their own operating conditions to determine whether the product is suitable for their particular purposes and they assume all risks of their use, handling, and disposal of the product, or from the publication or use of, or reliance upon, information contained herein. This information relates only to the product designated herein, and does not relate to its use in combination with any other material or in any other process.

END OF MSDS

 

 

©2007 CQ Concepts Inc.